Header

DimME KNX


This KNX trailing edge dimmer for capacitive loads offers easy control for up to six independent lighting zones with ten scenes each. preussen automation offers this dimmer in four different versions - with one, two, four and six channels.
The dimming speed can be controlled for each scene individual. Moreover the dimming time can be splitted per several channels, so all connected lighting fixtures can reach the desired brightness level at the same time - even from different base values.
According to the fixtures attributes the dimming characteristic can be applied via programming software.

DimME KNX

Types


  • DimME 1 KNX
    1 channel dimmer actuators (1600 W)

  • DimMe 1 KNX - 1 channel dimmer actuator
    DimMe 1 KNX - 1 channel dimmer actuator DimMe 1 KNX - 1 channel dimmer actuator



  • DimME 2 KNX
    2 channel dimmer actuators (à 800 W)

  • DimMe 2 KNX - 2 channel dimmer actuator
    DimMe 2 KNX - 2 channel dimmer actuator DimMe 2 KNX - 2 channel dimmer actuator DimMe 2 KNX - 2 channel dimmer actuator








  • DimME 4 KNX
    4 channel dimmer actuators (à 400 W)

  • DimMe 4 KNX - 4 channel dimmer actuator



  • DimME 6 KNX
    6 channel dimmer actuators (à 250 W)

  • DimMe 6 KNX - 6 channel dimmer actuator

    Functions


  •    Trailing edge dimmer
  •    Intelligent over heating protection
  •    Scene controller and scene dimmer
  •    Sequence controller
  •    Low threshold, high threshold and maximum threshold available to suit different loads of each channel
  •    Heating actuator function
  •    Staircase function
  •    On and off switch delay function
  •    Memory function
  •    Warning function
  •    Fade time



  • Technical data


       PHYSICAL CONNECTIONS

    Outputs DimME 1 KNX: 1 channels, 1600 W, max. 6 A / channel
    Outputs DimME 4 KNX: 4 channels, 400 W, max. 1.5 A / channel
    Outputs DimME 6 KNX: 6 channels, 250 W, max. 1 A / channel

    Input: DC 24 V KNX bus power
    Connection: KNX bus-clamp (red / grey) 0.8 mm²
    Outputs: For cable up to 2.5 mm², bistabile relays with isolated contacts (230 V, 50 / 60 Hz)


       POWER SUPPLY

    Input: AC 110 V - 220 V 50 Hz / 60 Hz (screwing terminal)
    Consumption in work: < 30 mA

       CONSTRUCTION

    Body material: plastic black
    Size DimME 1 KNX: 90 x 144 x 64 / REG 8 TE
    Size DimME 2 KNX: 90 x 216 x 64 / REG 12 TE
    Size DimME 4 KNX: 90 x 216 x 64 / REG 12 TE
    Size DimME 6 KNX: 90 x 216 x 64 / REG 12 TE

    Mounting: 35 mm rail mounting DIN EN 60715
    Weight DimME 1 KNX: 260 g
    Weight DimME 2 KNX: 490 g
    Weight DimME 4 KNX: 490 g
    Weight DimME 6 KNX: 740 g


       PROGRAMMING

    ETS4 (downward compatible)
    Adressing: MAC & Digital

       ELECTRICAL SAFETY

    Protection category: indoor
    Protection class: IP 20
    Fuse: 6 A
    Fluorescent lamp load : 6 A / 250 V (150 μF)


       CERTIFICATION

    KNX
    LVD Standard EN60669-2-1, EN60669-1
    EMC Standard EN50090-2-2


       COMMUNICATION

    Kind: KNX

       ENVIRONMENTAL CONDITIONS

    Working temperature: -5 °C ~ +45 °C
    Storage temperature: -25 °C ~ +55 °C
    Transport: -25 % + 70 %
    Relative humidity: max. 95 %, noncondensing


       DISPLAY

    Status LED for each channel


       CONTROLS

    Buttons for manual handling



    Support & Downloads


    CAUTION

    If you save productdatastore files (.vd4 files) these sometimes get saved as .zip files. This will damage the file. Please follow the instructions to save corretly:

    1. Right mouseclick to the needed downloadlink.
    2. Choose "save target as" from the contextmenue.
    3. At dropdown "filetyp" choose "all files (*.*)" and save to the folder you want.





    preussen automation GmbH

    Flurweg 11
    82402 Seeshaupt
    Germany

      +49 (0) 8801 / 91 19 - 030
      +49 (0) 8801 / 91 19 - 013
      service@preussen-automation.eu


    ARIBA Discovery

    Profile of eventa AG

    Profile of eventa AG in Ariba Discovery anzeigen