Header

DALI TW 6


The DALI TW 6 Module is a DALI compatible device (device type 6), especially designed to allow for the Tunable-White control of LED modules through a DALI interface. For correct function an external LED driver is required (DALI LED driver if brightness control is desired).

The device itself is powered independently from mains. The device is "Open-Frame" module that can be easily mounted into the luminaire.


DALI TW 6

Functions


The DALI TW 6 module is a DALI device designed for Tunable-White control. It is not a power source for LEDs. For correct function an external LED driver must be used (constant current).

Selection of the LED driver depends on the LED load used (forward voltage and current). DALI TW module controls the CCT of light according to the DALI commands received.

On DALI line, the device appears as standard DALI device type 6 (LED driver) allowing for direct CCT level control, group addressing, fading and scene settings.

The DALI TW module represents simple way of CCT control via DALI using standard components - LED driver and DALI controller.



Technical data


   KEY FEATURES

Independent control of CCT
Up to 180 V voltage range
DALI control (device type 6)


   PHYSICAL CONNECTIONS

Mains cable wires: AWG 28 - 16 (0.08 - 1.5 mm²)
DALI cable wires: AWG 28 - 16 (0.08 - 1.5 mm²)
LED cable wires: AWG 28 - 16 (0.08 - 1.5 mm²)


   POWER

Mains supply: 90 - 260 V/AC / 47 - 400 Hz / 120 - 370 V/DC
System power < 200 mW, DALI consumption < 2 mA
Insulation: class II

   OUTPUT

Output voltage range: 30 - 180 V/DC
Output current range: 0 - 2 A
Output power range: 0 - 150 W


   CONSTRUCTION

Housing: "Open-Frame"
Weight: 60 g
Dimensions: 94 x 45 x 26 mm


   ENVIRONMENTAL CONDITIONS

Operating temperature range from 0 ºC up to 55 ºC
Relative humidity 85 % max., non-condensing
Storage temperature range from -40 °C up to 70 °C

   CERTIFIKATION

EN 61547 Equipment for general lighting purposes EMC immunity requirements
EN 62386-102 Digital addressable lighting interface, general requirements for control gears

EN 55015 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment






preussen automation GmbH

Flurweg 11
82402 Seeshaupt
Germany

  +49 (0) 8801 / 91 19 - 030
  +49 (0) 8801 / 91 19 - 013
  service@preussen-automation.eu


ARIBA Discovery

Profile of eventa AG

Profile of eventa AG in Ariba Discovery anzeigen